仕様
| CPU Support | - Intel® Pentium® 4 or Celeron® (D) processor in the mPGA478 package
- FSB: 800/533/400MHz
- CPU support up to 3.4GHZ (Intel Desktop Processor) and Up to 3.0GHZ (Intel Embedded Processor)
- Supports Hyper- Threading technology
|
| Main Memory | - 2 x 184-pin DIMM, supports DDR 266/333/400 memory up to 2 GB
- Dual 64-bit DDR channels, 3.2 GB/s bandwidth per channel
- Supports un-buffered and non-ECC DIMMs only
|
| Chipset | - Intel® 865GV (GMCH) (Intel® 865G for RoHS Version)
- Intel® ICH5 (I/O controller Hub)
|
| BIOS | - Award System BIOS
- Plug & Play support
- Advanced Power Management support
- ACPI (Advanced Confi guration &Power Interface) support
- 4 Mbit fl ash ROM
|
| On-board LAN | - Intel® 82547EI Gigabit Ethernet controller (dedicated by CSA port directly from the Intel® 865GV GMCH) and 1 x Intel® 82551QM 10/100 Ethernet controller for PEAK 735VL2G
- Single Intel® 82551QM 10/100 Fast Ethernet controller for PEAK 735VL
- Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3y, IEEE 802.3ab
- 2 x RJ45 with LED
|
| Display | - Intel® 865GV (GMCH) chipset with integrated graphics controller
- Hardware motion compensation assist for software MPEG/DVD decoding
- Access system memory
- 1 x 15-pin CRT connector
|
| I/O Interface | - 2 x On-board USB port, USB 2.0 compliant
- Ultra ATA 100/66/33 support, 2 x 40-pin connector, 2-pin power connector for DOM (Disk On Module)
- Serial ATA support, 2 x SATA connector, data transfer bandwidth up to 150 MB/s
- ITE 8712F-A Super I/O
- 2 x SIO , with 16C550 UARTs, 10-pin header
- 1 x PIO, bi-directional, EPP/ECP support, 26-pin connector
- Floppy disk controller: 1 x 34-pin connector
- 1 x 6-pin mini DIN connector , for PS/2 Keyboard/Mouse, 1 x 5-pin connector(for external keyboard)
- 1 x On-board buzzer
- GPIO (4 in, 4 out)
- 1 x On-board 2-pin header for I2C
- 1 x On-board 5-pin header for IrDA
- On-board 2-pin header for reset SW, 4-pin for speaker, 5-pin for keylock, 2-pin for IDE active LED, 2-pin ATX power SW
- One 3-pin power header for 3-pin power cable connect to backplane board to support ATX power on function.
- On-board 4-pin additional power source input
|
| Watchdog Timer | - Watchdog timeout can be programmed by software from 1, 2, 4, 8, 16,32,…...256 seconds
|
| On-board RTC | - On-chip RTC with battery back up
- 1 x External Li Battery
|
| ISA Support | - ITE 8888F x 1 PCI to ISA Bridge
- Provides 64 mA high driving capability to maximize ISA signals and supports up to 20 ISA cards on the backplane ISA Slot
|
| System Monitor | - Derived from Super I/O ITE 8712F-A to support system monitor.
- 8 voltage (For+1.5 V, +3.3 V, +5 V, -5 V, +12 V, -12 V, Vcore and +5 Vsb)
- 2 fan speed (one is for CPU, one is for system)
- 2 temperature (one is for internal CPU, one is for external system)
- 2 temperature sensor (one is for internal CPU, one is for external system)
|
| Power Requirements | - CPU : 3.0 GHz
- +12 V: 6.5 A
- +5 V: 5.4 A
- +3.3 V: 0.5 A
- +5 Vsb: 0.5 A
- CPU : 2.4 GHz
- +12 V: 4.5 A
- +5 V: 4 A
- +3.3 V: 0.5 A
- +5 Vsb: 0.5 A
|
| Dimensions | - 338.58 mm (L) x 122 mm (W) (13.3” x 4.8”)
|
| Environment | - Board level operating temperature: 0°C to 60°C
- Storage temperature: -20°C to 80°C
- Relative humidity: 10% to 90% (Non-condensing)
|
| Certifications | |