このページをシェアする

NEX 608

Mini-ITX Intel® Atom™ Dual Core D525, DDR3, 3x Gigabit Ethernet
  • 主な特長
  • Support Intel® Atom™ Dual Core D525 Processor
  • Support DDR3 SO-DIMM SDRAM, up to 2GB
  • Support VGA/ LVDS 18/ 24-bit Display
  • Three Gigabit Ethernet
  • Support SATA RAID 0/1
  • 4x COMs, 6x USB 2.0, 1x LPT
  • Single DC24V Power Input
お問い合わせに追加
データシート (PDF)
CPU Support On-board Intel® Atom® Dual Core D525 (1.8GHz, 1M Cache) processor
Main Memory 1 x 204-pin DDR3 SO-DIMM socket, DDR3 800 2GB max., non-ECC and un-buffered
Platform Control Hub Intel® NH82801HBM (ICH8M)
BIOS AMI System BIOS Plug and play support
On-board LAN 3 x Realtek 8111L Gigabit Ethernet controller Support boot from LAN and wake on LAN 3 x RJ45 with LED
Display Intel® D525 integrated graphic engine, support Directx*9, with Intel® Clear Video Technology on MPEG2 hardware acceleration Analog VGA interface: 1x DB15 VGA port, support up to 2048 x 1563 @ 60Hz LVDS interface: support single 18/24-bit LVDS channel
Audio Realtek ALC888 CODEC for High Definition 1 x phone jack for Line-out 1 x phone jack for Mic-in
Expansion 1 x mini-PCIe socket 1 x PCI32 slot
I/O Interface Serial port: 3 ports 3 x RS232 DB9 connector (COM1, 2, 4) 1 x RS232/ 422/ 485 DB9 connector (COM3) USB 2.0: 6 ports: 2 ports with USB 2.0 connector; 2 ports with 2x5-pin header, 2.0mm pitch; 1 port supports USB DOM 8 x GPIO, 10-pin pin header, (GPI 0~3 and GPO0~3) with TTL Level (0/5 V) On-board power LED and HDD active LED pin header 1 x 26-pin connector for parallel port 1 x 3-pin fan connector (for CPU) 1 x mini-din connector for PS2 keyboard and mouse On board buzzer/ SMBus2.0/ reset
Watchdog Timer Watchdog timeout can be programmable by Software from 1 second to 255 seconds and from 1 minute to 255 minutes (Tolerance 15% under room temperature 25°C)
Storage 2 x SATA connectors (from ICH8M) 2 x SATA connectors (from Silicon Image 3132 SATA RAID controller, support RAID 0, 1)
System Monitor 4 voltages (+3.3V, +5V, +12V, Vcore) 2 temperatures (for CPU and 2 external temperature sensors) 2 FAN speed monitors
On-board RTC On-chip RTC with battery backup 1 x External Li-Ion battery
Power Input Support AT and ATX mode (ATX as the default)
Power Requirements Power requirement: +24V DC Input One 4-pin power connector
Dimensions Mini-ITX form factor 170mm (L) x 170mm
Environment Operating temperatures: 0°C to 60°C Storage temperature: -20°C to 8°C Relative humidity: Operating 10% to 90%, non-condensing
Certifications CE approval FCC Class A
お問い合わせに追加
Take a minute and tell us what you think!