VTC 1031/1031-C2

Intel Atom® 6413E Processor Fanless In-Vehicle Computer
  • 主な特長
  • Intel Atom® x6413E quad-core processor, 9W
  • Compact and fanless design
  • 5G NR and Wi-Fi 6/6E wireless communication options
  • Built-in U-blox M9N GNSS, optional dead reckoning support
  • Built-in 1 x CAN bus 2.0B (optional SAE J1939)
  • Wide range DC input from 9~36V
  • 2 x POE support, total 60W (VTC 1031-C2)
  • 1 x mini-PCIe + 2 x M.2 socket expansions
  • Optional AI accelerator M.2/mPCIe module
  • Certified by CE/UKCA/FCC/E13 mark
お問い合わせに追加
データシート (PDF)
CPU Intel Atom® x6413E quad-core processor, 1.5GHz, TDP 9W
Memory 1 x 260-pin DDR4 SO-DIMM socket support 3200MHz up to 32GB. Default 2666MHz, 4GB With In-Band ECC (IBECC)
Video Output 1 x HDMI 1.4b up to 3840 x 2160@30Hz 1 x VGA port 1920 x 1200@60Hz
Storage 1 x 2.5” SATA 3.0 internal drive bay (9.5mm) 1 x M.2 key M 2280 for SATA 3.0
Expansion 1 x Full size mini-PCIe socket (USB 2.0, PCIe 3.0), BOM optional M.2 3042 Key B socket (USB 2.0, USB 3.2 Gen 2) for LTE/5G NR module with 1 x internal micro-SIM and 1 x external micro-SIM 1 x M.2 2230 Key E socket (USB 2.0, PCIe 3.0 x2), BOM optional M.2 2230 Key E socket (USB 2.0, PCIe 3.0, PCIe 3.0) 1 x M.2 3042/3050/3052 Key B socket (USB 2.0, USB 3.2 Gen 2) for LTE/5G NR module with 1 x internal micro-SIM and 1 x external micro-SIM
GNSS and Onboard Sensor 1 x Default U-blox NEO-M9N GNSS module for GPS+QZSS/Glonass/Galileo/Beidou Optional M8U/M8L modules with dead reckoning available 1 x 3D accelerometer and 3D gyroscope
LAN and Power over Ethernet 1-Port LAN RJ45, 10/100/1000/2500 Mbps Ethernet, Intel® Ethernet Controller I225-IT (support WOL) 1-Port LAN RJ45, 10/100/1000 Mbps Ethernet, Marvell Ethernet PHY 88E1512 2-Port LAN RJ45, 10/100/1000 Mbps Ethernet, PoE 802.3af/at, max 60W (VTC 1031-C2)
Security TPM 2.0: Infineon SLB9670VQ2.0 FW7.62
I/O Interface-Front 6 x LED indicators (including 1 x programmable LED) 1 x USB 3.2 Gen 2 type A (5V/0.9A) 1 x USB 2.0 type A (5V/0.5A) 1 x Externally accessible micro-SIM card sockets with cover 1 x Reset button 1 x Power button 1 x DB9 (COM) for full RS232/422/485 1 x Mic-in, 1 x Line-out 1 x DB9 for Expansion Port (optional) 2 x RJ45 PoE, including 2 x PoE LED light (VTC 1031-C2) 4 x SMA connector holes for WWAN (VTC 1031)
I/O Interface-Rear 1 x HDMI 1 x VGA 1 x LAN (LAN1) RJ45, 10/100/1000/2500 Mbps 1 x LAN (LAN2) RJ45, 10/100/1000 Mbps 2 x USB 2.0 type A (5V/0.5A) 1 x DB26 (MULTI PORT)
- 1 x Isolated CANBus 2.0B
- 1 x RS232 Tx/ Rx
- 1 x GNSS Speed/Direction
- 5 x DI and 4 x DO
- 2 x RS485
- 12V/ 2A DC output
- GND 1 x 3-pin terminal block for power/ignition input 1 x SMA connector for GNSS 2 x SMA connector holes for WWAN 3 x RP-SMA connector holes for WLAN
Power Management & Software Support Power input 9~36VDC Cranking voltage: 6V~9V (< 30 seconds) Reverse protection, OCP & UVP Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level power on/off delay time by software 10~255 seconds WDT support, setup by software SDK (Windows/Linux) including utility and sample code
Operating System Windows 11/Windows 10/Linux
Dimensions 180mm (W) x 180mm (D) x 50mm (H)
Weight VTC 1031: 1.91kg VTC 1031-C2: 2.0kg
Environment Operating temperatures
- -40°C to 70°C (w/ industrial SSD) with air flow Storage temperatures: -40°C to 85°C Relative humidity: 90% (non-condensing) Vibration (random)
- 2g@5~500 Hz (in operation, SSD) Vibration (SSD)
- Operating: MIL-STD-810H, Method 514.8C, Procedure 1, Category 4, common carrier US highway truck vibration exposure
- Storage: MIL-STD-810H, Method 514.8E, Procedure 1, Category 24, minimum integrity test Shock (SSD)
- Operating: MIL-STD-810H, Method 516.8, Procedure I, functional shock=40g
- Non-operating: MIL-STD-810H, Method 516.8, Procedure V, crash hazard shock test=75g
Certifications CE UKCA FCC Class A E13 mark
お問い合わせに追加
Take a minute and tell us what you think!